TPS thrust cylindrical roller bearing

Contact Now

The TPS type thrust cylindrical bearing is similar to type TP, except the bottom washer is comprised of two races, with the contacting faces spherically ground. The TPS bearing is self-adjusting to initial misalignment. It is not suggested for applications where alignment may be continuously changing (dynamic misalignment).

Type TP-Thrust Cylindrical Roller Bearing Designed to operate under heavy loads at moderate speedstandard versions of type TS bearings can be operated at peripheral speeds of up to 3,000 feet per minute. Special design features are available for both the bearing and mounting, permitting even higher rotational speeds for this bearing type.

30TPS106 TPS thrust cylindrical roller bearing

Available 52100 Bearing Steel
12 Days or more Angular Contact Bear

120TPS151 TPS thrust cylindrical roller bearing

93 mm 85 mm
110 °C 3.28 mm

40TPS116 TPS thrust cylindrical roller bearing

18 mm 83 mm
1.06 kg 19.05 mm

160TPS165 TPS thrust cylindrical roller bearing

12.5 mm PA204N-
54 mm 20 mm

50TPS119 TPS thrust cylindrical roller bearing

60 mm -20 °C
32.8 kN 88.2 mm

80TPS136 TPS thrust cylindrical roller bearing

52 mm 13,000 rpm
0.36 kN NTN

50TPS122 TPS thrust cylindrical roller bearing

0.22 kg 8,900 rpm
5.77 Hz 120 °C

50TPS123 TPS thrust cylindrical roller bearing

DD (Contact Rubber S 56
Double 7 Days

140TPS158 TPS thrust cylindrical roller bearing

22 Nm -20 °C
158 mm 23 mm

90TPS140 TPS thrust cylindrical roller bearing

J7 Standard Grease
No No

160TPS165 TPS thrust cylindrical roller bearing

6 Deep Groove Ball Bea
Single Flanged Pilot Type

40TPS116 TPS thrust cylindrical roller bearing

8.3 Nm 49.2 mm
19 mm 14.3 kN
1/4